Vertical tank level sensor with S5 5-hole flange in the S5-E model is a resistive float sensor for measuring levels in fuel and water tanks. This variant has a nominal length of 590 mm and a resistance range of 0-190 Ω.
The sensor is designed for 12/24 V systems and is connected with two wires. It has a power rating of 125 mW, a maximum working current of 300 mA, and a permissible output deviation of ±(1 + R × 1.5 %) Ω. The analog signal is compatible with the documented instrument groups Yazaki three-wire, Faria Europa, VDO, Uflex, and Guardian. The sensor does not have an NMEA 2000 interface.
The sensor tube is made of AISI 316 stainless steel and has an outer diameter of 12.7 mm. The flange measures Ø69 mm and has a 3 mm thick top plate, while the gasket is made of NBR. The nominal sensor length is 590 ±2 mm, and the two-conductor cable routed out through the flange measures 460 ±20 mm. The sensor cannot be shortened.
Mounting is performed vertically from the top of the tank using an S5/SAE five-hole flange. Installation requires a central tank opening of Ø40 mm and five screw holes drilled with a Ø4.0-4.2 mm drill bit. The gasket can be used as a drilling template, and the cable direction must follow the opening in the gasket. The sensor is secured with five M5 screws, which are tightened in a star pattern.
The sensor is intended for gasoline, diesel, and water when the tank content is chemically compatible with AISI 316 and NBR. The housing is rated to IP65, and the documented operating temperature range is -40 °C to +85 °C.
The identical sensor reference is used as the Bavaria Reed Sensor E590 with spare part number 312866 and reference 312866_BH. It is documented for Bavaria SPORT 38, SPORT 39, and SR 36. The resistive output can also be connected directly to the tank input on Victron Cerbo GX and Ekrano GX.
The sensor family meets the EMC requirements of Directive 2014/30/EU with reference to EN 61326-1:2013 and EN 61000-6:2007 with associated amendments. This variant is also covered by the RoHS Directive (EU) 2015/863 and 2011/65/EU.
Always check tank depth, resistance range, flange drilling, and instrument compatibility before purchase and installation.
Key featuresResistive vertical tank level sensor with float
S5/SAE five-hole flange for vertical top mounting
Resistance range: 0-190 Ω
System voltage: 12/24 V
Sensor length: 590 ±2 mm
AISI 316 stainless steel with NBR gasket
For fuel and water tanks
IP65 and operating temperature from -40 °C to +85 °C
Cable length: 460 ±20 mm
Compatible with selected analog instruments and Victron GX systems