This vertical tank level sensor in AISI 316 stainless steel with S5 5-hole flange has a nominal sensor length of 20 cm and a resistive output signal of 240–33 Ω. The sensor is used for liquid level measurement in fuel and water tanks and is compatible with 12/24 V installations.
The level measurement is performed with an axially moving float around the sensor tube. The AISI 316 stainless steel construction is designed for contact with petrol, diesel, water, wastewater, and alcohol. The sensor has a power rating of 125 mW, a maximum operating current of 300 mA, and a documented temperature range from −40 °C to +85 °C.
The sensor is mounted vertically through an S5 5-hole flange. The flange has an outer diameter of 69 mm, a bolt circle of 54 ±0.25 mm, and five 5.5 mm mounting holes. The sensor tube has an outer diameter of 12.7 mm, while the flange thickness is 3 mm. The asymmetrical hole pattern has documented divisions of 68° and 72°.
The electrical connection is carried out as a 2-wire connection with a 460 ±20 mm cable. The wires are marked blue and black. During installation, the original wiring diagram must be followed, and the level indicator must be designed for the same resistance range of 240–33 Ω.
The sensor can be used with compatible 240–33 Ω level instruments from, among others, Teleflex, Aqua Meter, Vetus, S. Giorgio Sein/Veglia, Beede, Medallion, Datcom, and Wema, as well as level indicator item no. 27.160.00. The selected sensor length must match the specific tank depth. Other lengths can be manufactured upon request for a minimum of 20 units.
The sensor family is covered by the EMC Directive 2014/30/EU and the standards EN 61326-1:2013, EN 61000-6:2007, and EN 61000-6:2007/A1:2011/AC:2012. The protection class is IP65, and the technical reference for other requirements is QC/T 413-2002.
Key featuresVertical level measurement in fuel and water tanks
240–33 Ω resistive output signal
Universal 12/24 V compatibility
20 cm nominal sensor length
AISI 316 stainless steel
S5 5-hole flange with 54 mm bolt circle
2-wire connection with 460 ±20 mm cable
IP65 and operating temperature from −40 °C to +85 °C
CE compliance according to EMC Directive 2014/30/EU