Vertical tank level sensor in AISI 316 stainless steel with S5 5-hole flange for measuring liquid levels in fuel and water tanks. This S5-A variant has a nominal sensor length of 50 cm and provides a resistive signal of 240–33 Ω.
The sensor uses a vertically moving float and is compatible with 12/24 V installations. It must be connected to a tank instrument designed for a sender with a resistance range of 240–33 Ω. The compatible tank level instrument with item no. 27.160.00 can be used with this sensor series.
The construction is made of AISI 316 stainless steel and is intended for both fuel and water. The S5 flange has five mounting holes and follows the international 5-hole configuration, making the sensor suitable for tanks with a corresponding flange or hole configuration.
When mounting in a tank without an existing flange, a central hole of Ø 40 mm is required, as well as five screw holes of Ø 4.0–4.2 mm. The gasket can be used as a template for marking. The tank must be emptied and cleaned before work, and drill shavings must not fall into the tank. Place the sensor and gasket in the correct orientation, then tighten the five screws in a star pattern.
The sensor family complies with Directive 2014/30/EU as well as EN 61326-1:2013, EN 61000-6:2007, and EN 61000-6:2007/A1:2011/AC:2012. Other sensor lengths can be manufactured to order with a minimum quantity of 20 units.
Key featuresVertical, float-based level sensor
For fuel and water tanks
Resistance signal: 240–33 Ω
Universal for 12/24 V
Sensor length: 50 cm
AISI 316 stainless steel
S5 international 5-hole flange
Tank cutout: Ø 40 mm
Five mounting holes: Ø 4.0–4.2 mm
Model: S5-A