Stainless steel 316 vertical tank level sensor with S5 5-hole flange for measuring liquid levels in water and fuel tanks. This variant has a nominal sensor length of 80 cm and provides an analog resistance signal of 0–190 Ω to a compatible level gauge.
A float moves vertically along the sensor rod as the liquid level changes. The movement is converted into a resistance signal, which the level gauge uses to display the tank's contents. The sensor is intended for 12/24 V systems and has a nominal power rating of 125 mW and a rated current of 0.3 A.
The S5 flange is mounted vertically on top of the tank and has five mounting holes in an SAE/VDO-like pattern. The flange has an outer diameter of approx. 69 mm, while the tank requires a central opening of approx. Ø40 mm. The specified drill diameter for the five mounting screws is 4.0–4.2 mm. The gasket is made of NBR/nitrile rubber, and the sensor, gasket, and mounting screws are included.
The sensor can be used with three-wire Yazaki instruments, Faria Europa, VDO, Uflex, and Guardian, when the instrument supports the 0–190 Ω signal range. It fits tanks with an S5/VDO-like five-hole flange, including the documented tank part numbers 52.194.80, 52.194.81, 52.194.82, 52.194.90, and 52.194.91. Since the sensor already has an S5 flange, an S5-to-S3 adapter such as part no. 52.746.10 is not necessary for direct S5 mounting.
The stainless steel 316 construction is designed for contact with both water and fuel. The sensor has IP65 protection, a specified temperature range from −40 °C to +85 °C, and a cable of approx. 0.46 m. The length tolerance is ±5 mm, while the resistance tolerance is ±(R × 1.5 % + 1 Ω).
The sensor series meets EMC Directive 2014/30/EU in relation to EN 61326-1:2013, EN 61000-6:2007, and EN 61000-6:2007/A1:2011/AC:2012. The variant is also covered by RoHS Directive (EU) 2015/863, which amends Directive 2011/65/EU.
Key featuresAnalog vertical level measurement for water and fuel
Nominal sensor length: 80 cm
Resistance signal: 0–190 Ω
Universal for 12/24 V systems
Stainless steel 316
S5 flange with five mounting holes
Vertical mounting on top of the tank
IP65 and temperature range from −40 °C to +85 °C
Compatible with selected Yazaki, Faria Europa, VDO, Uflex, and Guardian instruments
Sensor, NBR gasket, and mounting screws included