This vertical 316 stainless steel tank level sensor with S5 5-hole flange has a sensor length of 32 cm and is designed for electrical measurement of the level in fuel or water tanks. The sensor operates in the resistance range of 240–33 Ω and is compatible with both 12 V and 24 V systems.
The level measurement is performed by a moving float on the vertical sensor rod. The 316 stainless steel construction is suitable for marine tank installation, where the sensor is mounted vertically through the top of the tank. The selected sensor length must match the internal height of the tank and provide sufficient clearance for the float.
The sensor is mounted using an international S5 flange with five screw holes. The flange has an outer diameter of Ø69 mm. The central tank cutout is specified as Ø40 mm / 1½″, while the five mounting holes must be Ø4.0–4.2 mm. The flange gasket can be used as a template when marking the holes.
The signal range is compatible with relevant 240–33 Ω instruments from Teleflex, Aqua Meter, Vetus, S. Giorgio Sein (Veglia), Beede, Medallion, Datcom, and Wena, as well as the instrument with item no. 27.160.00. The tank's flange type, permissible sensor length, and internal clearance must always be checked before installation.
The sensor family complies with EMC Directive 2014/30/EU and the specified EN standards, as well as RoHS Directives (EU) 2015/863 and 2011/65/EU.
Key featuresVertical tank level sensor with moving float
For fuel and water tanks
Resistance range: 240–33 Ω
Compatible with 12 V and 24 V systems
Sensor length: 32 cm
316 stainless steel
S5 flange with five mounting holes
Flange diameter: Ø69 mm
Vertical mounting in the top of the tank
EMC and RoHS compliance