This vertical 316 stainless steel tank level sensor with S5 5-hole flange is a 350 mm long resistive level sender for detecting liquid levels in fuel or water tanks. The sensor provides a 240–33 Ω signal and is compatible with 12 and 24 V electrical systems.
The level is detected using a cylindrical float that moves along the vertical sensor tube. The magnetic, reed-switch-based design features the float as the only moving part. The output signal is 240 Ω at empty tank and 33 Ω at full tank, so the connected instrument must use the same resistance range.
The sensor tube and sensor body are made of AISI 316 stainless steel. The sensor can be used with gasoline, diesel, water, alcohol, and – in this AISI 316 version – wastewater. The protection class is IP65, and the documented operating temperature range is –40 °C to +85 °C.
The sensor is mounted from the top of the tank using a standardized S5/SAE 5-hole flange. The flange has an outer diameter of 69 mm, a bolt circle of 54 ±0.25 mm, and five asymmetrically placed 5.5 mm mounting holes. The installation is dimensioned for five 13 mm long M5 screws and uses an NBR gasket. The outer diameter of the sensor tube is 12.7 mm.
The electrical connection is made with two wires, marked blue and black, and a 460 ±20 mm cable. The nominal power is 125 mW, the maximum operating current is 300 mA, and the resistance tolerance is ±(1 + R × 1.5 %) Ω. The sensor can be used with 240–33 Ω instruments from, among others, Teleflex, Aqua Meter, Vetus, S. Giorgio Sein/Veglia, Beede, Medallion, and Datcon/Datcom, as well as the instrument with part no. 27.160.00.
The product complies with the RoHS directive (EU) 2015/863 and the EMC directive 2014/30/EU. Documented standard references include EN 61326-1:2013, EN 61000-6:2007, EN 61000-6:2007/A1:2011/AC:2012, and QC/T413-2002.
Key featuresVertical resistive tank level sensor with moving float
240–33 Ω signal: 240 Ω empty and 33 Ω full
Sensor length: 350 mm
For fuel and water tanks
AISI 316 stainless steel
Compatible with 12 and 24 V systems
S5/SAE 5-hole flange for tank top mounting
IP65 and operating temperature from –40 °C to +85 °C
Two wires and 460 ±20 mm cable
RoHS and EMC compliance