Vertical stainless steel 316 tank level sensor with S5 flange for measuring liquid levels in fuel and water tanks. This variant has a sensor length of 58 cm and provides a 240–33 ohm resistive signal to a compatible level instrument.
The sensor functions as a vertical tank sender with a float and is compatible with 12/24 V systems. Electrical compatibility includes instruments designed for 240–33 ohm, including relevant models from Teleflex, Aqua Meter, Vetus, S. Giorgio Sein/Veglia, Beede, Medallion, Datcom, and Wena. The resistance characteristic must always match the connected instrument.
The construction is made of 316 stainless steel and is intended for vertical top mounting. The S5 flange has five mounting holes, and the flange head has an outer diameter of 69 mm. Installation requires a central tank cutout of 40 mm as well as five mounting holes, for which a drill bit of Ø4.0–4.2 mm is recommended. The connected cable is 0.46 ± 0.02 m long.
When mounting, empty and rinse the tank, and keep the filling opening open. The gasket can be used as a template for the central cutout and screw holes. Place the sensor and gasket with the opening oriented according to the cable direction, then tighten the screws evenly in a cross or star pattern. The tank depth and internal clearance must match the sensor length of 580 mm.
The sensor has an IP65 rating and a documented operating temperature range from −40 °C to +85 °C. It complies with the EMC Directive 2014/30/EU and RoHS (EU) 2015/863, as well as the standards EN 61326-1:2013, EN 61000-6:2007, and EN 61000-6:2007/A1:2011/AC:2012. The standard variant is 58 cm and is not documented as adjustable or trimmable.
Key featuresFor fuel and water tanks
Sensor length: 58 cm
Output signal: 240–33 ohm
Compatible with 12/24 V systems
Stainless steel 316
S5 flange with five mounting holes
Central tank cutout: 40 mm
Flange head diameter: 69 mm
IP65 and operating temperature from −40 °C to +85 °C
EMC and RoHS compliant