Vertical stainless steel 316 tank level sensor with S5 5-hole flange is a 32 cm long tubular sensor for monitoring levels in fuel and water tanks. The ring-shaped float moves vertically along the sensor tube and provides a resistive signal of 0–190 Ω to a compatible tank gauge.
The sensor is made of AISI 316 stainless steel and can be used in both 12 V and 24 V systems. The electrical connection consists of two conductors, and the cable measures 460 ±20 mm. The sensor has a rated power of 125 mW, a maximum operating current of 300 mA, and an IP65 protection rating. The documented temperature range is −40 °C to +85 °C.
The nominal sensor length is 320 mm with a tolerance of ±2 mm. The sensor tube has a diameter of Ø12.7 mm, while the S5 flange has an outer diameter of Ø69 mm and a thickness of 3 mm. The flange uses an asymmetric SAE 5-hole pattern with a Ø54 ±0.25 mm bolt circle and five flange holes of approximately Ø5.5 mm.
The sensor is mounted on the top of the tank. For installation in a tank without an existing flange, a central opening of Ø40 mm must be established, as well as five screw holes of Ø4.0–4.2 mm. The mounting is designed for an NBR gasket and five M5 screws of approximately 13 mm. The gasket opening must face the same direction as the cable outlet, and the screws should be tightened in a star pattern. The tank must be emptied and cleaned before work, while the filler cap must be kept open during preparation.
This 32 cm variant is compatible with 3-wire instruments from Yazaki, Faria Europa, VDO, Uflex, and Guardian. The sensor remains a 2-wire unit. It can also be connected as a resistive tank sender to tank inputs on the Victron Cerbo GX and Ekrano GX. Signal-matching 0–190 Ω fuel gauges include item nos. 27.320.00, 27.321.00, 27.322.00, 27.320.02, 27.321.02, and 27.322.02.
The sensor family meets the EMC requirements of Directive 2014/30/EU with reference to EN 61326-1:2013, EN 61000-6:2007, and EN 61000-6:2007/A1:2011/AC:2012. The specific variant is also covered by RoHS Directive (EU) 2015/863, which amends 2011/65/EU.
Key featuresFor fuel and water tanks
Resistive output signal of 0–190 Ω
Universal for 12/24 V systems
Sensor length: 32 cm
AISI 316 stainless steel
S5/SAE 5-hole flange
2-wire connection with 460 ±20 mm cable
IP65 protection rating
Operating temperature from −40 °C to +85 °C