This vertical 316 stainless steel tank level sensor with S5 5-hole flange, 0–190 Ω has a length of 45 cm and measures the liquid level using a movable float. The sensor is designed for vertical mounting on top of fuel and water tanks and can be used in both 12 V and 24 V systems.
The sensor features a European 0–190 Ω resistance signal and a two-wire connection. The nominal power rating is 125 mW, and the maximum operating current is 300 mA. This variant is compatible with Yazaki 3-wire, Faria Europe, VDO, Uflex, and Guardian instruments, provided the instrument supports the relevant European signal range. It must not be connected directly to an instrument intended exclusively for 240–33 Ω.
The sensor housing and metal parts are manufactured from AISI 316 stainless steel. The sensor tube has an outer diameter of 12.7 mm, while the flange measures 69 mm in diameter and is 3 mm thick. The nominal sensor length is 450 mm with a tolerance of ±2 mm. The attached cable is 460 ±20 mm long.
The S5 flange features five asymmetrically positioned mounting holes on a 54 ±0.25 mm bolt circle. Installation requires a 40 mm center hole and five 4.0–4.2 mm screw holes. The included NBR gasket is used as a drilling and orientation template to ensure correct placement of the flange, gasket, and cable direction. The sensor kit includes the gasket and five M5 × 13 mm screws.
The sensor has IP65 protection and a proven operating temperature range from −40 °C to +85 °C. The construction is suitable for petrol, diesel, water, wastewater, and alcohol. The product complies with EMC Directive 2014/30/EU and RoHS Directive (EU) 2015/863 amending 2011/65/EU.
During installation, the tank must be emptied and cleaned, and drilling shavings must be prevented from falling into the tank. The sensor is mounted vertically with sufficient clearance for the 450 mm long probe, after which the screws are tightened evenly in a star pattern.
Key featuresVertical float-based level measurement
45 cm sensor length
European 0–190 Ω resistance signal
Universal for 12/24 V systems
AISI 316 stainless steel
S5 flange with five mounting holes
For fuel and water tanks
IP65 protection
Operating temperature from −40 °C to +85 °C
NBR gasket and five M5 × 13 mm screws included