This vertical 316 stainless steel tank level sensor with S5 flange is a resistive S5-A sensor for monitoring levels in fuel and water tanks. The variant has a nominal sensor length of 48 cm and an analog output signal of 240–33 Ω for compatible level instruments.
The level is detected by an axially moving float on the sensor tube. The sensor can be used in 12 V and 24 V installations and has a nominal power rating of 125 mW and a maximum operating current of 300 mA. The permitted deviation of the resistance output is ±(1 Ω + R × 1.5%).
The sensor housing and sensor tube are manufactured from AISI 316 stainless steel. The construction has IP65 ingress protection and is intended for operation from −40 °C to +85 °C. Documented working media include petrol, diesel, water, wastewater, and alcohol, while the primary application is level monitoring in fuel and water tanks.
The S5 flange has five mounting holes, an external diameter of Ø69 mm, and a bolt circle of Ø54 ±0.25 mm. The sensor tube measures Ø12.7 mm, the flange plate is 3 mm thick, and the nominal sensor length is 480 mm with a tolerance of ±2 mm. The sensor is supplied with a two-wire connection and a 460 ±20 mm cable.
When mounting in a tank without an existing S5 flange, a cutout of Ø40 mm and five pilot holes of Ø4.0–4.2 mm are used. The gasket can be used as a template, after which the sensor is mounted with the wire direction aligned with the gasket opening. The screws are tightened in a star pattern. The tank must be emptied and cleaned, and drilling chips must be removed before mounting.
The sensor fits the S5 universal flange or SAE 5-hole mounting pattern and must be connected to a level instrument designed for 240–33 Ω. It is, among others, compatible with relevant instruments from Teleflex, Aqua Meter, Vetus, S. Giorgio/Sein, Beede, Medallion, Datcom, and Wena. A documented compatible 12 V fuel level instrument has item no. 27.160.00.
The product meets EMC Directive 2014/30/EU and RoHS Directive (EU) 2015/863, as well as the specified EN standards. The sensor length must be chosen according to the internal depth of the tank and the specific mounting position.
Key featuresVertical, resistive S5-A tank level sensor
240–33 Ω analog output signal
For 12 V and 24 V installations
48 cm sensor length with a tolerance of ±2 mm
AISI 316 stainless steel
S5 flange with SAE 5-hole mounting pattern
IP65 and operating temperature from −40 °C to +85 °C
For fuel and water tanks
Two-wire connection with 460 ±20 mm cable
CE and RoHS compliance