This vertical 316 stainless steel tank level sensor with S5 flange is an electric float sensor for monitoring the level in fuel and water tanks. The variant has a sensor length of 55 cm and is mounted vertically in the tank.
The sensor provides a resistive signal of 0–190 Ω and can be used in both 12 V and 24 V installations. The position of the float changes the resistance according to the liquid level, allowing a compatible tank gauge to display the current fill level of the tank.
The construction consists of 316 stainless steel and sealing elements made of NBR/nitrile rubber. The flange head has a diameter of 69 mm, and the connected cable is 0.46 ± 0.02 m long. The sensor is IP65 rated and intended for operating temperatures from −40 °C to +85 °C.
Mounting is done with an S5 flange with five holes. The sensor can be used in tanks with S5/VDO 5-hole preparation, provided the tank depth matches the sensor length of 55 cm. It is compatible with three-wire Yazaki instruments as well as instruments from Faria Europe, VDO, Uflex, and Guardian. The instrument must support a signal range of 0–190 Ω.
The electrical data includes a power rating of 0.125 W and a current of 0.3 A. The resistance tolerance is ±(R × 1.5 % + 1 Ω), while the sensor length has a tolerance of ±5 mm. The sensor meets the RoHS requirements of Directive (EU) 2015/863, which amends Directive 2011/65/EU, and is covered by the documented EMC standards EN 61326-1:2013 and EN 61000-6:2007.
Key featuresFor fuel and water tanks
Sensor length: 55 cm
Resistive output signal: 0–190 Ω
Universal 12/24 V
316 stainless steel and NBR/nitrile rubber
S5 flange with five mounting holes
Vertical mounting
IP65 and operating temperature from −40 °C to +85 °C
Cable length: 0.46 ± 0.02 m
Compatible with documented 0–190 Ω tank gauges