Vertical stainless steel 316 tank level sensor with S5 flange is a resistive tank sender for measuring fluid levels in fuel and water tanks. This variant has a nominal sensor length of 80 cm and is mounted vertically from the top of the tank.
The sensor provides a resistive signal of 240–33 Ω and can be used in 12/24 V installations. The vertical float follows the fluid level and changes the sensor's resistance, allowing a compatible tank gauge to display the current tank level. The output resistance tolerance is ±(R × 1.5 % + 1 Ω).
The construction is made of AISI 316 stainless steel with components in nitrile rubber/NBR. The S5 flange has five mounting holes and a flange diameter of 69 mm. The sensor is IP65 rated, has a cable length of 0.46 ± 0.02 m, and is specified for temperatures from −40 °C to +85 °C. The length tolerance is ±5 mm.
The 240–33 Ω signal is compatible with instruments from, among others, Teleflex, Aqua Meter, Vetus, S. Giorgio Sein/Veglia, Beede, Medallion, Datcom, and Wema, as well as instrument item no. 27.160.00. The instrument must explicitly support the resistance range of 240–33 Ω.
For installation, drain and flush the tank before drilling. The S5 gasket can be used as a template for the center hole and the five screw holes; the installation manual specifies approximately 40 mm center hole and 4 mm screw drill. Tighten the fasteners evenly in a cross or star pattern with the gasket correctly positioned. Always follow the current installation manual and the tank manufacturer's instructions.
The sensor meets the RoHS requirements of Directive 2011/65/EU and (EU) 2015/863. Technical standard references include EN 61326-1:2013, EN 61000-6 series, and ISO 2768C.
Key featuresFor fuel and water tanks
Resistive signal: 240–33 Ω
Can be used in 12/24 V installations
Sensor length: 80 cm
S5 flange with 5 mounting holes
Flange diameter: 69 mm
AISI 316 stainless steel and NBR
Vertical top mounting
IP65
Temperature range: −40 °C to +85 °C