45° angled deck filler in mirror-polished stainless steel for filling onboard water tanks. The deck filler is marked WATER and has a Ø38 mm hose barb for connection to a Ø38 mm filling hose.
The hose connection is angled at 45° relative to the vertical. The design is intended for installations where the deck or filling surface is sloped and where a straight fitting would therefore not provide appropriate hose routing.
The deck filler is manufactured from mirror-polished stainless steel and designed for flush mounting in the deck. The precision-cast cap features an integrated opening handle that sits flush with the cap when closed. A safety chain retains the cap during filling to prevent it from being lost.
The flange has a nominal diameter of 80 mm, while the maximum face diameter is 83 mm. The installation part behind the faceplate is Ø53 mm. Mounting is performed via three Ø5.1 mm holes positioned on a Ø69 mm bolt circle. The total horizontal extension behind the flange plane is 78 mm, and the face/flange plate has an axial thickness of 5 mm.
The outer ring is marked WATER, and the handle/insert parts are blue for clear identification of the water filler. If the installation requires a straight fitting, a WATER variant with a Ø38 mm connection is available under item no. 20.467.02.
Key featuresFor water tank filling
WATER marking with blue handle/insert parts
45° angled Ø38 mm hose barb
Mirror-polished stainless steel
Flush-mounted, precision-cast cap
Integrated flush opening handle
Safety chain for the cap
Nominal flange diameter: 80 mm
Three Ø5.1 mm mounting holes on a Ø69 mm bolt circle
