Description
The Webasto Air Top Evo 40 is built to withstand the most extreme weather conditions on board, and is highly efficient and also very quiet in operation.
High output, compact and very quiet in operation, the boat heater is ideal for use at all times of the day, even at night. It comes with the new MultiControl timer/thermostat, which offers 3 additional different operating modes depending on individual heating requirements. 3 heaters in 1
· Heat output 1.5 - 3.5 (4.0*) KW 5,100 - 12000 (13,600*)BTU/h
· Fuel Diesel 0.18 - 0.43 (0.49) l/h
· Rated power consumption 15 - 40 (55)W
· Air outlet Ø 90 mm
· Extraction Ø 24 mm
* Boost power level for a maximum duration of 6 hours
Including mounting parts for heater and control unit:
· Control panel
· External temp. sensor
· Wiring harness
· Exhaust w/muffler
· Exhaust through-hull
· Fuel hose
· Intake hose w/silencer
· Tank/suction nozzle
· Fuel filter
· Brackets and clamps
NOTE: Boat mounting kit for air distribution must be ordered separately.
INSTALLATION OF HEATERS:
· Diesel heaters "rumble" a bit, so they should be placed in the stern/chest bench/engine compartment so that the sound is not heard in the cabin (apart from a little air noise).
· The exhaust gas is routed into a "swan neck" up under the deck and then out through the side/stern.
· Fresh, oxygen-rich air is led heated into the cabin(s) through air hoses.
· Air recirculation = repeated heating of hot air is not recommended.
· Fresh air is easier to "heat" than recirculated air.
· The room in which the heater is placed must be well ventilated with sufficient "cold" fresh air supply.
· The heater's combustion air must either be led to an open valve or taken from outside (called balanced exhaust).
· Experience shows that the heater itself is "only" about 50%. The marine accessories and the installation itself are at least 50% of the finished result.
Categories