This manual bilge pump repair kit is designed for the service and maintenance of the Whale Compac 50. The kit has the manufacturer part number AK8035 and contains the key replaceable wear parts for the pump's diaphragm and valve system.
The kit consists of 12 individual parts: one inlet valve, one outlet valve, one deck plate bellows, one diaphragm, four clamping rings, and four No. 6 × 1/2" screws for the pump connections. The diaphragm is made of nitrile rubber.
The repair kit fits the Whale Compac 50 models BP0350(B), BP0352B, MH0360, and MH0364. BP0350 and MH0350 are also documented historical model references. The kit can be used for the complete Compac 50 pumps with item numbers 15.350.00 and 15.350.02.
When replacing the diaphragm, remove the clamping ring screws, clamping rings, clamping plate screw, and clamping plate. The new diaphragm is installed with the center part facing towards the valve chamber and is placed correctly in the grooves of the cover sides. The hoses can remain in place during this part of the work.
The valves are replaced by removing the four self-tapping screws at the base of the inlet and outlet ports. The new valves are placed in the pump's grooves, after which the ports are reattached and secured. The pump's rubber components should be checked regularly and replaced as needed.
Compatible models
Whale Compac 50: BP0350(B), BP0352B, MH0360 and MH0364.
Historical model references: BP0350 and MH0350.
Related item numbers
Complete Compac 50 pump, white: 15.350.00
Complete Compac 50 pump, black: 15.350.02
Lid, ring, and deck seal kit: 15.350.98
Clamping and locking ring kit with screws: 15.350.99
Key featuresComplete repair kit for Whale Compac 50
Manufacturer part number: AK8035
Contains diaphragm, two valves, bellows, and fastening parts
Nitrile rubber diaphragm
A total of 12 individual parts
For regular service and replacement of pump wear parts