Whale Gulper 320 self-priming diaphragm pump for grey waste and bilge water is an electric 12 V DC pump for drainage from shower trays, galley sinks, grey water tanks, and fish boxes, as well as for use as a small, remotely mounted bilge pump. This variant is manufacturer model BP2052 and is supplied as a BULK version.
The pump delivers 19 l/min at 1 m discharge head and 0 m suction lift, and 17.4 l/min at 1 m discharge head and 1 m suction lift. The maximum suction lift and discharge head are each 3 m, while the maximum combined suction lift and discharge head is 4 m. The Gulper 320 has approximately 35% higher flow than the Gulper 220.
The self-priming diaphragm design can pump a mixture of air and water and can run dry without damage. Non-clogging valves reduce the risk of blockage, and the pump does not require a regular operating filter that needs cleaning. The pump head is made of glass-reinforced nylon, the valves of nitrile rubber, and the diaphragm of Santoprene®.
The patented Ezi-Clamp system allows the pump head to be rotated 360°, so that the hose connections can be oriented after installation without loosening screws. The pump has adapters for 19 mm (3/4") and 25 mm (1") hose, three mounting feet, and a vibration-dampening rubber mounting strap. Smooth, reinforced hose is recommended. The pump can be mounted horizontally or vertically; for vertical mounting, the pump head must face downwards.
The longest product dimension is 280 mm, and the maximum width across the pump head and hose ports is 198 mm. The motor housing is 112 mm wide in front projection. The mounting location must be dry and protected from accidental water exposure.
The power consumption is 7.5 A at 12 V DC. The installation requires a recommended 10 A blade fuse in the positive line and at least 1.5 mm² wire. Connect the red wire to positive and the black wire to negative. The pump is protected against reverse polarity and is activated via an external on/off switch or an external automatic float switch; automatic operation also requires an isolation or master switch.
The pump has IP45 protection, is CE certified, and meets relevant marine standards, including ISO 8849, ISO 15083, ISO 10133, ISO 8846, and ABYC H-22. It can be used as a bilge pump on boats under 12 m in accordance with ISO 15083, but it is not intended as the sole solution for rapid or extensive water ingress.
Replacement pump head/service kit AK2050 and locking ring AS1562 are documented service parts for the Gulper 320. Grey water tank with item no. 16.222.98 is prepared for this pump variant. Avoid aggressive chemicals such as chlorine, as they can shorten the life of the rubber valves. The product is covered by a 3-year warranty.
Key features12 V DC self-priming diaphragm pump
Flow: 19 l/min at 1 m discharge head and 0 m suction lift
Flow: 17.4 l/min at 1 m discharge head and 1 m suction lift
Max. suction lift and discharge head: 3 m
19/25 mm hose connection
360° rotatable pump head with Ezi-Clamp
Can run dry without damage
Power consumption: 7.5 A
IP45 and CE certified
BULK version, model BP2052