This Whale Quick Connect shut-off valve 15 mm is a manual inline valve for regulating water flow in marine and mobile water installations. The valve can open or close a 15 mm pipe line and features a Quick Connect female connection at both ends.
The valve is part of the Whale Quick Connect/WX15 system and is designed for plastic pipes with a 15 mm outside diameter. The push-fit principle allows for assembly without soldering, glue, or separate locking clips. The connection can be dismantled by pressing the grey collet toward the fitting while pulling the pipe out.
The Quick Connect design uses Double Gripper retention, internal O-ring support, and protection around the collet. This contributes to secure pipe retention and reduces the risk of accidental disconnection. The valve body is made of glass-fiber reinforced polypropylene.
The valve can be used in both cold and hot water systems within combined pressure and temperature limits: max. 12 bar at max. 20 °C for cold water and max. 6 bar at max. 65 °C for hot water. These limits must be considered as related operating values; 12 bar does not apply at 65 °C.
When installing, the pipe must be cut clean and square and pushed all the way into the fitting's secondary internal stop. The system must be drained and winterized to avoid frost damage. In dry storage, the system withstands temperatures down to -40 °C; this is not an operating temperature for a water-filled installation.
The valve can be combined with blue 15 mm cold water pipe, item no. 17.815.52, or red 15 mm hot water pipe, item no. 17.815.54. Use Whale plastic pipe and grooved Whale stem adapters designed for the Quick Connect system.
Key featuresManual two-way inline shut-off valve
For 15 mm Whale Quick Connect water installation
15 mm Quick Connect female connection at both ends
Push-fit installation without soldering, glue, or separate locking clips
Dismantlable and reusable connection
Glass-fiber reinforced polypropylene
Max. 12 bar at 20 °C for cold water
Max. 6 bar at 65 °C for hot water