Whale Swim ’N’ Rinse built-in deck shower for hot/cold water without lid is an external freshwater shower for mounting on the boat’s transom, cockpit, or bathing platform. The integrated mixer regulates hot and cold water, while the hand shower can be pulled out for rinsing off salt water and sand.
The pull-out shower hose has a nominal length of 2.10 m and a maximum effective reach of 1.8 m after installation. The hand shower has a temporary stop function, allowing the water flow to be interrupted briefly without changing the selected temperature mix. The stop function must not be used as a permanent shut-off, as the hand shower is not designed for constant system pressure and is not drip-proof.
The shower is made of white ABS and has a base plate of 167 × 292 mm as well as an installation depth of 88 mm. The mounting cutout is 244.5 × 130.5 mm, and fastening is done through six Ø 4.4 mm holes. Mounting screws and white covers for the screw heads are included. The product is splash-proof, but not waterproof.
The water connections have 1/2" external BSP/NPT threads. For 13 mm flexible hose, a Whale AS0314 connector can be used, while the Whale WX1532 connects the unit to 15 mm semi-rigid Quick Connect piping; these connectors are not included. The system is rated for 3 bar/45 psi, and the maximum operating pressure must not exceed 50 psi, equivalent to approximately 3.45 bar.
During installation, there must be free space behind the mounting surface so that the hose can retract without being pinched or tangled in other equipment. Position the installation so that water along the hose cannot drip onto electrical equipment or fixtures. In case of risk of frost, the freshwater system must be completely drained while the flow selector is left in the open position.
The spare shower head with item no. 17.030.99 is documented for this shower. Whale AS5148 is a 2.10 m spare shower hose, and AK5030 is a service kit for the Swim ’N’ Rinse series. A plastic mesh bag with item no. 15.290.50 can be used for storing the hose under the deck.
Key featuresBuilt-in deck shower without lid
Integrated mixer for hot and cold water
Pull-out hose of 2.10 m
Maximum effective reach of 1.8 m
Temporary stop function on hand shower
White ABS construction
1/2" external BSP/NPT thread
System pressure up to 3 bar/45 psi
Max. operating pressure 50 psi/approx. 3.45 bar
Mounting cutout 244.5 × 130.5 mm