This VDO ViewLine tachometer is an electronic marine instrument with a black dial, analog display, and a measuring range from 0 to 3000 RPM. The instrument is designed for 12/24 V installations and has an instrument size of 85 mm.
The engine speed is displayed by a white, illuminated pointer with a sweep angle of 240°. The integrated 37 × 11 mm LCD display can also show operating hours, voltage, and time when the instrument is connected with the appropriate cable and programming equipment. A red warning LED is integrated as standard, and an acoustic alarm output is available as an option.
The instrument supports signal inputs W, IND, DDEC, HALL, and terminal 1. It can therefore be used with, among others, the generator's W-signal, an inductive sensor, a suitable Hall sensor, or an ignition signal, provided the signal type and calibration match the engine installation. The pulse range can be programmed from 0.5 to 399 pulses per revolution and is set by default to 6 pulses per revolution. NMEA 0183 signal connection is possible as an option.
The nominal voltage is 12/24 V DC, while the operating voltage range is 8–32 V DC. Power consumption is less than 175 mA including the warning LED. The electronics are protected against reverse polarity and overvoltage.
The housing is made of flame-retardant polycarbonate in class UL94-V0. The double PMMA lens has an anti-fog feature, and the black polycarbonate bezel matches the dial. The front is ingress-protected to IP67, while the back is IP52 according to IEC 60529. The dial has amber LED lighting, and the pointer and warning indicator have red LED lighting.
The tachometer is mounted in an Ø 85 mm panel hole and has an external front diameter of 93 mm and a mounting depth of 50 mm. The included Spinlock fastening can be used for panel thicknesses from 0.5 to 18 mm. Flush mounting is also possible with a separate mounting solution.
For the basic tachometer function, the 8-pin connector with cable, item no. 27.599.11, is used. The additional LCD functions require the 14-pin connector with cable, item no. 27.599.12, while programming is performed with programming button 27.599.13. Sensor or transducer is not included.
The manufacturer part number is A2C59512390. Previous cross-references are N02-012-145 and N02-012-146.
Key featuresMeasuring range: 0–3000 RPM
Analog display with 240° sweep angle
LCD display for operating hours, voltmeter, and clock
Signal inputs: W, IND, DDEC, HALL, and terminal 1
Programmable range: 0.5–399 pulses per revolution
Voltage: 12/24 V DC
Mounting hole: Ø 85 mm
Mounting depth: 50 mm
IP67 front and IP52 back
Double PMMA lens with anti-fog function